Electric Motor Accessories from Hobby Lobby!

Pinion puller SPEED 400 to SPEED 600 size motors	HLAN2938 Puller for Pinion Gears ..... $ 34.90 AVAILABLE NOW Tool has 3 set screws: one blunt end, one with 2mm and one with 3mm shafts for pushing out the motor shafts from pinion gears. Works on all 2.3mm motor shafts (SPEED 400’s) and all 3.2mm motor shafts (SPEED 500, 600).


Screws for Installing Motors (10 screws per bag) HLH8725 2.5 x 8mm for SPEED 400 ..... $ 1.90 AVAILABLE NOW	HLH8730 3 x 10mm for SPEED 500/600/Phasor ..... $ 1.90 AVAILABLE NOW HLH8740 4 x 10mm for Ultra/Mega ..... $ 1.90 AVAILABLE NOW HLH8746 4 x 6mm Pan Head Screw ..... $ 1.90 AVAILABLE NOW For mounting AXI 41 series motors to Aluminum Mount PM41001.


Stator rings increase motor running time. Small Stator Ring and Mounts fit SPEED 400, Mabuchi 380S and motors of 1-3/32” diameter (28mm). Larger ones fit SPEED 500/600, Mabuchi 540/550 and motors of 1-3/8” diameter (35.5mm). Stator Rings lower RPM, current flow to increase duration. GR1794/1 Stator Ring for SPEED 400 ..... $ 5.60 AVAILABLE NOW	GR1794/2 Motor Mount Set, SPEED 400 Motors ..... $ 6.50 AVAILABLE NOW GR1156 Stator Ring for SPEED 500-600 Motors ..... $ 4.00 AVAILABLE NOW GR1153 Motor Mount Set for SPEED 500 and 600 Motors ..... $ 6.90 AVAILABLE NOW


	Quick-connecting noise-reducing capacitor for 280 and 300 motors POT101 Quick Capacitor Set for SPEED 280/300 ..... $ 2.60 AVAILABLE NOW Tiny pc board of capacitors for RF interference rejection. Just solder into place on back of motor.


Interference-reducing Motor Capacitors At the time that you solder wires to an electric motor, install these to reduce radio interference from the motor. The small capacitors are to be soldered from the motor case to the motor terminals.	GR3584 Small Capacitor, 47mf ..... $ 1.80 AVAILABLE NOW GR3588 Large Capacitor, 470mf ..... $ 2.80 AVAILABLE NOW Solder this one between the motor terminals. POT100 3 pcs. Motor Capacitor, 100mf ..... $ 2.10 AVAILABLE NOW For SPEED 280 and smaller motors.